|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
APT15GP60K 600V POWER MOS 7 IGBT (R) The POWER MOS 7(R) IGBT is a new generation of high voltage power IGBTs. Using Punch Through Technology this IGBT is ideal for many high frequency, high voltage switching applications and has been optimized for high frequency switchmode power supplies. TO-220 * Low Conduction Loss * Low Gate Charge * Ultrafast Tail Current shutoff MAXIMUM RATINGS Symbol VCES VGE VGEM I C1 I C2 I CM SSOA PD TJ,TSTG TL Parameter Collector-Emitter Voltage Gate-Emitter Voltage Gate-Emitter Voltage Transient * 100 kHz operation @ 400V, 19A * 200 kHz operation @ 400V, 12A * SSOA rated G C E C G E All Ratings: TC = 25C unless otherwise specified. APT15GP60K UNIT 600 20 30 56 27 65 65A @ 600V 250 -55 to 150 300 Watts C Amps Volts Continuous Collector Current @ TC = 25C Continuous Collector Current @ TC = 110C Pulsed Collector Current 1 @ TC = 25C Switching Safe Operating Area @ TJ = 150C Total Power Dissipation Operating and Storage Junction Temperature Range Max. Lead Temp. for Soldering: 0.063" from Case for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Symbol BVCES VGE(TH) VCE(ON) Characteristic / Test Conditions Collector-Emitter Breakdown Voltage (VGE = 0V, I C = 250A) Gate Threshold Voltage (VCE = VGE, I C = 1mA, Tj = 25C) MIN TYP MAX UNIT 600 3 4.5 2.2 2.1 250 2 10-2005 050-7418 Rev A 6 2.7 Collector-Emitter On Voltage (VGE = 15V, I C = 15A, Tj = 25C) Collector-Emitter On Voltage (VGE = 15V, I C = 15A, Tj = 125C) Collector Cut-off Current (VCE = 600V, VGE = 0V, Tj = 25C) 2 Volts I CES I GES Collector Cut-off Current (VCE = 600V, VGE = 0V, Tj = 125C) Gate-Emitter Leakage Current (VGE = 20V) A nA 2500 100 CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com DYNAMIC CHARACTERISTICS Symbol Cies Coes Cres VGEP Qg Qge Qgc SSOA td(on) tr td(off) tf Eon1 Eon2 Eoff td(on) tr td(off) tf Eon1 Eon2 Eoff Symbol RJC RJC WT Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate-to-Emitter Plateau Voltage Total Gate Charge 3 APT15GP60K Test Conditions Capacitance VGE = 0V, VCE = 25V f = 1 MHz Gate Charge VGE = 15V VCE = 300V I C = 15A TJ = 150C, R G = 5, VGE = 15V, L = 100H,VCE = 600V Inductive Switching (25C) VCC = 400V VGE = 15V I C = 15A 4 5 MIN TYP MAX UNIT pF V nC A 1685 210 15 7.5 55 12 15 65 8 12 29 58 130 152 121 8 12 69 88 130 267 268 MIN TYP MAX UNIT C/W gm ns ns Gate-Emitter Charge Gate-Collector ("Miller ") Charge Switching Safe Operating Area Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy Turn-off Switching Energy Characteristic Junction to Case (IGBT) Junction to Case (DIODE) Package Weight 44 55 R G = 5 TJ = +25C Turn-on Switching Energy (Diode) 6 J Inductive Switching (125C) VCC = 400V VGE = 15V I C = 15A R G = 5 TJ = +125C Turn-on Switching Energy (Diode) 66 J THERMAL AND MECHANICAL CHARACTERISTICS .50 N/A 1.90 1 Repetitive Rating: Pulse width limited by maximum junction temperature. 2 For Combi devices, Ices includes both IGBT and FRED leakages 3 See MIL-STD-750 Method 3471. 4 Eon1 is the clamped inductive turn-on-energy of the IGBT only, without the effect of a commutating diode reverse recovery current adding to the IGBT turn-on loss. (See Figure 24.) 5 Eon2 is the clamped inductive turn-on energy that includes a commutating diode reverse recovery current in the IGBT turn-on switching loss. A Combi device is used for the clamping diode as shown in the Eon2 test circuit. (See Figures 21, 22.) 6 Eoff is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. (See Figures 21, 23.) APT Reserves the right to change, without notice, the specifications and information contained herein. 050-7418 Rev A 10-2005 TYPICAL PERFORMANCE CURVES 30 25 20 15 10 5 0 TC=25C TC=125C TC=-55C VGE = 15V. 250s PULSE TEST <0.5 % DUTY CYCLE 30 25 20 15 10 5 0 APT15GP60K VGE = 10V. 250s PULSE TEST <0.5 % DUTY CYCLE IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) TC=25C TC=125C TC=-55C 0 0.5 1 1.5 2 2.5 3 VCE, COLLECTER-TO-EMITTER VOLTAGE (V) 250s PULSE TEST <0.5 % DUTY CYCLE 0 0.5 1 1.5 2 2.5 3 VCE, COLLECTER-TO-EMITTER VOLTAGE (V) IC = 15A TJ = 25C FIGURE 1, Output Characteristics(VGE = 15V) 100 TJ = -55C VGE, GATE-TO-EMITTER VOLTAGE (V) FIGURE 2, Output Characteristics (VGE = 10V) 16 14 12 10 8 6 4 2 0 0 10 20 30 40 50 GATE CHARGE (nC) FIGURE 4, Gate Charge 60 VCE = 480V IC, COLLECTOR CURRENT (A) 80 VCE = 120V VCE = 300V 60 40 TJ = 25C 20 TJ = 125C 0 0 2 4 6 8 10 12 VGE, GATE-TO-EMITTER VOLTAGE (V) FIGURE 3, Transfer Characteristics TJ = 25C. 250s PULSE TEST <0.5 % DUTY CYCLE VCE, COLLECTOR-TO-EMITTER VOLTAGE (V) VCE, COLLECTOR-TO-EMITTER VOLTAGE (V) 3.5 3 2.5 3.5 3 2.5 2 1.5 1 0.5 VGE = 15V. 250s PULSE TEST <0.5 % DUTY CYCLE IC =30A IC = 15A IC =30A IC = 15A IC = 7.5A 2 1.5 1 0.5 8 10 12 14 16 VGE, GATE-TO-EMITTER VOLTAGE (V) FIGURE 5, On State Voltage vs Gate-to- Emitter Voltage 1.2 0 6 IC = 7.5A 0 25 50 75 100 125 TJ, Junction Temperature (C) FIGURE 6, On State Voltage vs Junction Temperature 80 0 -50 -25 BVCES, COLLECTOR-TO-EMITTER BREAKDOWN VOLTAGE (NORMALIZED) 1.10 1.05 1.0 0.95 0.9 0.85 0.8 -50 IC, DC COLLECTOR CURRENT(A) 1.15 70 60 50 40 10-2005 30 20 10 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 8, DC Collector Current vs Case Temperature 0 -50 -25 050-7418 -25 0 25 50 75 100 125 TJ, JUNCTION TEMPERATURE (C) FIGURE 7, Breakdown Voltage vs. Junction Temperature Rev A 18 td (OFF), TURN-OFF DELAY TIME (ns) td(ON), TURN-ON DELAY TIME (ns) 80 70 60 50 40 30 20 10 0 VCE = 400V RG = 5 L = 100 H VGE =15V,TJ=25C VGE =10V,TJ=125C VGE =15V,TJ=125C APT15GP60K 16 14 12 10 8 6 4 2 0 VCE = 400V TJ = 25C or 125C RG = 5 L = 100 H VGE= 10V VGE= 15V VGE =10V,TJ=25C 5 10 15 20 25 30 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 9, Turn-On Delay Time vs Collector Current 30 TJ = 25 or 125C,VGE = 10V 5 10 15 20 25 30 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 10, Turn-Off Delay Time vs Collector Current 100 25 tr, RISE TIME (ns) tf, FALL TIME (ns) 80 TJ = 125C, VGE = 10V or 15V 20 15 10 5 0 TJ = 25 or 125C,VGE = 15V RG =5, L = 100H, VCE = 400V 60 TJ = 25C, VGE = 10V or 15V 40 20 RG =5, L = 100H, VCE = 400V 5 10 15 20 25 30 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 11, Current Rise Time vs Collector Current 700 EON2, TURN ON ENERGY LOSS (J) VCE = 400V L = 100 H RG = 5 5 10 15 20 25 30 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 12, Current Fall Time vs Collector Current 700 EOFF, TURN OFF ENERGY LOSS (J) VCE = 400V L = 100 H RG = 5 0 TJ = 125C, VGE = 10V or 15V 600 500 400 300 200 TJ =125C, VGE=15V 600 500 400 300 200 100 0 TJ =125C,VGE=10V TJ = 25C, VGE=15V 100 0 TJ = 25C, VGE=10V TJ = 25C, VGE = 10V or 15V 0 5 10 15 20 25 30 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 13, Turn-On Energy Loss vs Collector Current 900 SWITCHING ENERGY LOSSES (J) VCE = 400V VGE = +15V TJ = 125C 5 10 15 20 25 30 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 14, Turn Off Energy Loss vs Collector Current 700 SWITCHING ENERGY LOSSES (J) VCE = 400V VGE = +15V RG = 5 800 700 600 500 400 300 200 100 0 0 Eon2 30A 600 500 Eoff 30A Eon2 30A 400 300 200 100 0 -50 Eoff 30A 10-2005 Eon2 15A Eoff 15A Eon2 7.5A Eoff 7.5A Eon2 15A Eoff 15A Eon2 7.5A Eoff 7.5A Rev A 050-7418 10 20 30 40 50 RG, GATE RESISTANCE (OHMS) FIGURE 15, Switching Energy Losses vs. Gate Resistance -25 0 25 50 75 100 125 TJ, JUNCTION TEMPERATURE (C) FIGURE 16, Switching Energy Losses vs Junction Temperature TYPICAL PERFORMANCE CURVES 4,000 IC, COLLECTOR CURRENT (A) 70 Cies 60 50 40 30 20 10 0 APT15GP60K 1,000 C, CAPACITANCE ( F) 500 Coes 100 50 Cres 10 P 10 20 30 40 50 VCE, COLLECTOR-TO-EMITTER VOLTAGE (VOLTS) Figure 17, Capacitance vs Collector-To-Emitter Voltage 0 100 200 300 400 500 600 700 VCE, COLLECTOR TO EMITTER VOLTAGE Figure 18, Minimim Switching Safe Operating Area 0 0.60 0.50 0.9 0.40 0.7 0.30 0.5 0.3 ZJC, THERMAL IMPEDANCE (C/W) Note: PDM t1 t2 0.20 0.10 0 0.1 0.05 10-5 10-4 SINGLE PULSE Peak TJ = PDM x ZJC + TC Duty Factor D = t1/t2 10-3 10-2 10-1 RECTANGULAR PULSE DURATION (SECONDS) Figure 19A, Maximum Effective Transient Thermal Impedance, Junction-To-Case vs Pulse Duration 1.0 292 Junction temp. ( "C) 0.216 Power (Watts) 0.284 Case temperature 0.164 0.00600 FMAX, OPERATING FREQUENCY (kHz) RC MODEL 100 50 FIGURE 19B, TRANSIENT THERMAL IMPEDANCE MODEL 15 20 25 30 35 40 45 50 IC, COLLECTOR CURRENT (A) Figure 20, Operating Frequency vs Collector Current 10 TJ = 125C TC = 75C D = 50 % VCE = 400V RG = 5 5 10 Fmax = min(f max1 , f max 2 ) f max1 = f max 2 = Pdiss = 0.05 t d (on ) + t r + t d(off ) + t f Pdiss - Pcond E on 2 + E off 050-7418 Rev A TJ - TC R JC 10-2005 APT15GP60K Gate Voltage APT15DF60 10% TJ = 125 C td(on) V CC IC V CE tr 90% A D.U.T. Collector Current 5% Switching Energy 10% 5% Collector Voltage Figure 21, Inductive Switching Test Circuit Figure 22, Turn-on Switching Waveforms and Definitions VTEST 90% Gate Voltage Collector Voltage *DRIVER SAME TYPE AS D.U.T. TJ = 125 C A V CE 100uH IC V CLAMP B td(off) tf 90% 10% Switching Energy 0 A DRIVER* D.U.T. Collector Current Figure 23, Turn-off Switching Waveforms and Definitions Figure 24, EON1 Test Circuit TO-220AC Package Outline 1.39 (.055) 0.51 (.020) 10.66 (.420) 9.66 (.380) 5.33 (.210) 4.83 (.190) 6.85 (.270) 5.85 (.230) Collector 16.51 (.650) 14.23 (.560) 3.42 (.135) 2.54 (.100) 4.08 (.161) Dia. 3.54 (.139) 6.35 (.250) MAX. 14.73 (.580) 12.70 (.500) 0.50 (.020) 0.41 (.016) 2.92 (.115) 2.04 (.080) 10-2005 Gate Collector Emitter 1.77 (.070) 3-Plcs. 1.15 (.045) 1.01 (.040) 3-Plcs. 0.38 (.015) 2.79 (.110) 2.29 (.090) 5.33 (.210) 4.83 (.190) 4.82 (.190) 3.56 (.140) Rev A Dimensions in Millimeters and (Inches) APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. 050-7418 |
Price & Availability of APT15GP60K |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |